1.5 kw spindle water cooling spindle high speed
It is very impoartant fot customers to choose the right power for
their cnc router machine! Spindle with lager power is not only a
waste of electricity but also increase the cost for work.Instead,
if the power of spindle is too small, then it is not enough for
their power requirement and can not finish work well, so choose
right power of spindle is very important!
1.5 kw spindle water cooling spindle Shun tong
|Spindle type||Shuntong 1.5 kw|
|Size||80 * 230 mm|
|Power||1.5 k w|
|Joint of nose||ER11 (1-7 mm)|
|Collet||ER11 (1- 7 mm)|
|Collet nut||3.175mm,4mm,6mm (1 - 7 mm)|
|Wattanty time||bearings: half a year and other parts a year|
304 stainless steel and the high-pressure cast aluminum pipe,
1.5 kw spindle water cooling spindle Instructions for use
1. First of all it must be connected to the cooling water pipe, so
that the first electrical spindle connected to the cooling pipe and
then start. Connect the spindle out of the water connector as
required to check for leaks and unobstructed connections. The
cooling system should be operated continuously. Coolant requires a
separate water tank, and monthly replacement; coolant temperature
should be lower than the ambient temperature of 3 ~ 5 ℃ is
appropriate, the best control at 25 ℃ or so. Shut off the work
piece coolant, and then off the spindle motor.
2. Select the frequency converter should be with the spindle
voltage, power, frequency matching to match the use. Setting the
inverter First, set the reference frequency of the inverter. The
reference frequency of the inverter is set according to the highest
frequency of the spindle.
2. Before use, turn the spindle by hand. If the feeling of blocking
is not flexible, then the fault should be ruled out and then check
the direction of spindle rotation, if the spindle should be
reversed to change the power wiring.
3. As the precision angular contact ball bearing grease limit the
speed limit, the motor spindle does not allow speeding. Speeding
will cause precision angular contact ball bearings burned.
4. Grinding the work piece with the cooling water can not rush to
the front cover of the spindle to prevent the front bearing cover
gap into the water to burn motor and bearings, the motor must not
We have water cooled cnc spindle, air cooled cnc spindle and self
cooling cnc spindle for choose.
1.water cooled cnc spindle: 300w, 800w, 1.2kw, 1.5kw, 2.2kw, 3kw, 3.2kw, 4kw, 4.5kw, 5.5kw
2.air cooled cnc spindle: 800w, 1.5kw, 2.2kw, 3.5kw, 4.5kw, 6kw, 7.5kw, 12kw
3. cnc spindle self cool: 400w
4.spindle ATC: cooled by water: 1.5kw, 2.2kw, 5.5kw, 6kw, 7.5kw
cooled by air: 8kw, 9kw (same HSD)
Besides that we supply spindles by OEM according to your
Our Main Production:
CNC Wood Router
--- CNC Woodworking Machines
--- CNC Router Multi Head
--- Automated Wood Router
--- CNC Cylinder Router
--- 3D CNC Router
--- CNC Machine Center
--- 5 Axis CNC Router
CNC Engraving Machine
---Small CNC Router
---Adversting CNC router
CNC Router Parts
--- CNC Router Controller
--- CNC Router Spindle
--- CNC Router Motor
--- CNC Router Inverter
--- CNC Router Driver
--- CNC Router Tools
--- Other Cnc Router Parts
Jinan Love Home Industry Co., Ltd as the cnc router center in China has over 6 years history to produce cnc wood router from 2011 year. We concentrate on the cnc industrial wood router.
Cnc wood machine is the largest supplier for the full cnc router parts for sale, for example: cnc router spindle, cnc
router motors, all kinds of cnc router tools, cnc router table for
sale, etc.. We can ensure that the best price for orders.
Wholesale wood cnc router for sale made in China is now being available at cnc router center, which
comes straight from the manufacturers.
We supply quality cnc routers for sale with affordable price for our customers worldwide. Glad to receive
your email for any questions about the wood working machinery!
Jinan Love Home Industry Co.,Ltd.
Tel:+ 86 15665709009 Email:email@example.com
Skype:cncwoodmachine Contact Person: Anna